New posts are disabled while we improve the user experience.

You can browse the site, or for urgent issues, raise a query at MyAccount.

question

Upvotes
Accepted
3 6 4 5

ADS Question

RSSL disconnect from host "xays.com" at address 1.1.0.1 on channel 23. Reason: Channel timed out waiting for login request.

What can cause this kind of issue?

refinitiv-realtimeelektrontrepinfrastructureADSdisconnection
icon clock
10 |1500

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

Upvotes
Accepted
87.8k 294 53 79

I got the same error with ADS 3.2.0.L1 if the consumer application didn't send a login request to the server. Therefore, the server disconnected the connection.

A login request is the first request sent to ADS to register and authenticate a user with the system. Please make sure that the consumer application successfully sent a login request to the server.

If you set *ads*logMountRequests to True on ADS, you will see the following log when ADS receives and accepts a login request.

<reinforce.1.ads: Info: Fri Feb 16  13:07:54 2018>
RSSL login request from "U8009686" at position "10.42.84.119/net" on host "U8009686-TPL-A" using application "256" on channel 19.
<END>

<reinforce.1.ads: Info: Fri Feb 16  13:07:54 2018>
RSSL login accepted for "U8009686" at position "10.42.84.119/net" on host "U8009686-TPL-A" using application "256" on channel 19.
<END>
icon clock
10 |1500

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

Upvotes
3 6 4 5

could this be a monitoring tool that is checking port status perhaps?

icon clock
10 |1500

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.