question

Upvotes
Accepted
chamindaa avatar image
9 ●2 ●2 ●6

InterfaceName in universal channel configuration list

There is a parameter called InterfaceName in universal channel entry parameters. (Please refer section 3.2.2 in EMAC302_ConfigurationGuide.pdf) Is this a required (compulsory)? What will happen if this is not setup in a machine with multiple network interfaces where consumer application is running?

elektronrefinitiv-realtimeelektron-sdkema-apirrtelektron-message-apiconfiguration
icon clock
10 |1500

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

pimchaya.wongrukun01 avatar image   pimchaya.wongrukun01

Hello @chamindaa

Thank you for your participation in the forum. Is the reply below satisfactory in resolving your query? If yes please click the 'Accept' text next to the reply. This will guide all community members who have a similar question. Otherwise please post again offering further insight into your question.

Thanks, AHS

1 Answer

· Write an Answer
Upvotes
Accepted
Jirapongse avatar image
79.1k ●250 ●52 ●74

It states in the EMA Configuration Guide that InterfaceName is for use in systems that have multiple network interface cards. If unspecified, the default network interface is used. Therefore it is optional.

icon clock
10 |1500

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.