just market open time or close time, in our consumer server above error happened...
not that time, working perfectly...
bandwidth of our provider server to refinitiv is 20Mbps..
is this problem??
Do i have to set compression type??
please help me..
here is our emaConfig file.
<?xml version="1.0" encoding="UTF-8"?>
<EmaConfig>
<!-- ConsumerGroup provides set of detailed configurations to be used by named consumers-->
<!-- Application specifies which configuration to use by setting OmmConsumerConfig::consumerName()-->
<ConsumerGroup>
<!-- DefaultConsumer parameter defines which consumer configuration is used by OmmConsumer-->
<!-- if application does not specify it through OmmConsumerConfig::consumerName()-->
<!-- first consumer on the ConsumerList is a DefaultConsumer if this parameter is not specified-->
<DefaultConsumer value="WAIKER_CONSUMER_1"/>
<ConsumerList>
<Consumer>
<!-- Name is mandatory-->
<Name value="WAIKER_CONSUMER_1"/>
<ChannelSet value="WAIKER_DATA_CHANNEL_1, WAIKER_DATA_CHANNEL_2"/>
<!-- Channel is optional: defaulted to "RSSL_SOCKET + localhost + 14002"-->
<!-- Channel or ChannelSet may be specified-->
<!-- <Channel value="WAIKER_DATA_CHANNEL_1"/>-->
<!-- Dictionary is optional: defaulted to "ChannelDictionary"-->
<!-- <Dictionary value="Dictionary_1"/>-->
<!-- <Dictionary value="ChannelDictionary"/>-->
<!-- <XmlTraceToStdout value="0"/>-->
<!-- <LoginRequestTimeOut value="3000000"/>-->
<!--
Specifies the length of time (in milliseconds) a stream waits to receive an ACK for outstanding post
before forwarding a negative acknowledgement to the application.
If set to 0, the Enterprise Message API will wait for a response indefinitely.
-->
<PostAckTimeout value="0"/>
<!--
Specifies the maximum number of times the consumer and non interactive provider attempt to reconnect to a channel
when it fails. If set to -1, the consumer and non-interactive provider continually attempt to reconnect
-->
<ReconnectAttemptLimit value="-1"/>
<ReconnectMaxDelay value="5000"/>
<ReconnectMinDelay value="1000"/>
<LoginRequestTimeOut value="2000"/>
<!--
Specifies the maximum allowable number of on-stream posts waiting for an acknowledgment before OmmConsumer disconnects.
default : 100000
-->
<!-- <MaxOutstandingPosts value="9000000"/>-->
<!-- <ReissueTokenAttemptInterval value="30000"/>-->
<!-- <ReissueTokenAttemptLimit value="-1"/>-->
<!-- <RequestTimeout value="480000"/> <!– 8 min –>-->
</Consumer>
<Consumer>
<!-- Name is mandatory-->
<Name value="WAIKER_CONSUMER_2"/>
<!-- Channel is optional: defaulted to "RSSL_SOCKET + localhost + 14002"-->
<!-- Channel or ChannelSet may be specified-->
<Channel value="WAIKER_DATA_CHANNEL_2"/>
<!-- Dictionary is optional: defaulted to "ChannelDictionary"-->
<!-- <Dictionary value="Dictionary_1"/>-->
<!-- <Dictionary value="ChannelDictionary"/>-->
<!-- <XmlTraceToStdout value="0"/>-->
<!-- <LoginRequestTimeOut value="3000000"/>-->
<!--
Specifies the length of time (in milliseconds) a stream waits to receive an ACK for outstanding post
before forwarding a negative acknowledgement to the application.
If set to 0, the Enterprise Message API will wait for a response indefinitely.
-->
<PostAckTimeout value="0"/>
<!--
Specifies the maximum number of times the consumer and non interactive provider attempt to reconnect to a channel
when it fails. If set to -1, the consumer and non-interactive provider continually attempt to reconnect
-->
<ReconnectAttemptLimit value="-1"/>
<ReconnectMaxDelay value="5000"/>
<ReconnectMinDelay value="1000"/>
<!-- <LoginRequestTimeOut value="960000"/>-->
<LoginRequestTimeOut value="2000"/>
<!--
Specifies the maximum allowable number of on-stream posts waiting for an acknowledgment before OmmConsumer disconnects.
default : 100000
-->
<!-- <MaxOutstandingPosts value="9000000"/>-->
<!-- <ReissueTokenAttemptInterval value="30000"/>-->
<!-- <ReissueTokenAttemptLimit value="-1"/>-->
<!-- <RequestTimeout value="480000"/> <!– 8 min –>-->
</Consumer>
</ConsumerList>
</ConsumerGroup>
<!-- IProviderGroup provides set of detailed configurations to be used by named providers -->
<!-- Application specifies which configuration to use by setting OmmIProviderConfig::providerName() -->
<!-- <IProviderGroup>-->
<!-- <!– DefaultIProvider parameter defines which provider configuration is used by OmmProvider –>-->
<!-- <!– if application does not specify it through OmmIProviderConfig::providerName() –>-->
<!-- <!– first provider on the IProviderList is a default provider if this parameter is not specified –>-->
<!-- <DefaultIProvider value="Provider_1"/>-->
<!-- <IProviderList>-->
<!-- <IProvider>-->
<!-- <!– Name is mandatory –>-->
<!-- <Name value="Provider_1"/>-->
<!-- <!– Server is optional: defaulted to "RSSL_SOCKET + 14002" –>-->
<!-- <Server value="Server_1"/>-->
<!-- <!– Directory is optional: defaulted to AdminControl::UserControlEnum –>-->
<!-- <!– source directory configuration to use if OmmIProviderConfig::adminModel() –>-->
<!-- <!– was set to ApiControlEnum –>-->
<!-- <!– this configuration also decides which dictionaries will be loaded at startup –>-->
<!-- <!– this configuration may be overwritten by OmmIProviderConfig::addAdminMsg() –>-->
<!--<!– <Directory value="Directory_2"/>–>-->
<!-- <ItemCountHint value="10000"/>-->
<!-- <ServiceCountHint value="10000"/>-->
<!-- <DispatchTimeoutApiThread value="500" />-->
<!-- <MaxDispatchCountApiThread value="500" />-->
<!-- <MaxDispatchCountUserThread value="500" />-->
<!-- <PipePort value="9009" />-->
<!-- <RefreshFirstRequired value="1" />-->
<!-- <!– 추가)-->
<!-- Default is 15000. OmmProvider waits for a response to a request before sending another request.-->
<!-- the DICTIONARY domain will not send another request.-->
<!-- If set to 0, the Message API waits for a response indefinitely.-->
<!-- –>-->
<!-- <RequestTimeout value="0"/>-->
<!-- <!– 추가)-->
<!-- Default is 15000. OmmProvider waits for a response to a request before sending another request.-->
<!-- the DICTIONARY domain will not send another request.-->
<!-- If set to 0, the Message API waits for a response indefinitely.-->
<!-- –>-->
<!-- </IProvider>-->
<!-- </IProviderList>-->
<!-- </IProviderGroup>-->
<ChannelGroup>
<ChannelList>
<Channel>
<Name value="WAIKER_DATA_CHANNEL_1"/>
<!-- ChannelType possible values are:-->
<!-- ChannelType::RSSL_SOCKET - TCP IP connection type-->
<ChannelType value="ChannelType::RSSL_SOCKET"/>
<!-- CompressionType is optional: defaulted to None-->
<!-- possible values: None, ZLib, LZ4-->
<CompressionType value="CompressionType::None"/>
<!-- <GuaranteedOutputBuffers value="5000"/>-->
<GuaranteedOutputBuffers value="50000"/>
<SysRecvBufSize value="50000"/>
<SysSendBufSize value="50000"/>
<!-- ConnectionPingTimeout is optional: defaulted to 30000-->
<!-- <ConnectionPingTimeout value="30000000"/>-->
<ConnectionPingTimeout value="10000"/> <!-- 10초 -->
<!-- TcpNodelay is optional: defaulted to 1 -->
<!-- possible values: 1 (tcp_nodelay option set), 0 (tcp_nodelay not set)-->
<TcpNodelay value="1"/>
<Host value="providerIP"/>
<Port value="14002"/>
<InitializationTimeout value="600"/> <!-- 10분 -->
</Channel>
<Channel>
<Name value="WAIKER_DATA_CHANNEL_2"/>
<!-- ChannelType possible values are:-->
<!-- ChannelType::RSSL_SOCKET - TCP IP connection type-->
<ChannelType value="ChannelType::RSSL_SOCKET"/>
<!-- CompressionType is optional: defaulted to None-->
<!-- possible values: None, ZLib, LZ4-->
<CompressionType value="CompressionType::None"/>
<!-- <GuaranteedOutputBuffers value="5000"/>-->
<GuaranteedOutputBuffers value="50000"/>
<SysRecvBufSize value="50000"/>
<SysSendBufSize value="50000"/>
<!-- ConnectionPingTimeout is optional: defaulted to 30000-->
<!-- <ConnectionPingTimeout value="30000000"/>-->
<ConnectionPingTimeout value="10000"/> <!-- 10초 -->
<!-- TcpNodelay is optional: defaulted to 1 -->
<!-- possible values: 1 (tcp_nodelay option set), 0 (tcp_nodelay not set)-->
<TcpNodelay value="1"/>
<Host value="Provider_Ip2"/>
<Port value="14002"/>
<InitializationTimeout value="600"/> <!-- 10분 -->
</Channel>
</ChannelList>
</ChannelGrou
</EmaConfig>
