Why am I getting "Tried all hosts. Unable to connect" when I am trying to connect Thomson Reuters...

benny.george

... trep-rt

Getting error "Tried all hosts. Unable to connect"

Find more posts tagged with

trep

error

elektron

refinitiv-realtime

Accepted answers

All comments

warat.boonyanit

Hi @benny.george

The error message just means that API cannot connect to TREP.

If this is the first time you tried to connect to TREP server, then check the connection configuration. Make sure that hostname and port are correct.

Otherwise, check the status of TREP server whether the server is available or not.

Also, try ping or telnet the TREP server to see if it is reachable.

Gurpreet

@benny.george: First thing to test is if you have network connectivity to TREP servers. From your question you are trying SSL connection to reuters-ems-trep1 and reuters-ems-trep2 from the UAT environment. Can you verify that the port 8101 is open and you are able to establish a connection. A telnet command from the UAT box like telnet reuters-ems-trep1 8101 can quickly validate this.

benny.george

@Gurpreet: the telnet we have tried beofore itself and it is working fine. Aiso as I have mentioned we could se the user mounted from the dacs console and the ip showing there is the same as the test machines ip.

wasin.w

Hello @benny.george

Could you please use the rmdestestclient tool to verify the SSL connection from your machine to the TREP server? This rmdestestclient is a tool to verifying connection, authentication and subscription between client machine and TREP infrastructure.

You can download this
tool from customer zone web site (https://customers.reuters.com/a/support/technical/softwaredownload/Default.aspx) in the MDS-Infra category and products
“Infrastructure Tools”

The tool document is bundled with the package, however you can run this tool
via the following steps

Download the package to
the local machine, then extract it
Copy the RDMFieldDictionary
file from the <package>/rhel6_x86_64 or other folders to the
<package>/win_x86_64 folder
Open <package>/win_x86_64
folder in the command prompt
Create the item.txt
file, then input the RIC name in the first line and press enter
Run the rmdstestclient
tool via the following command

rmdstestclient -S <TREP Service> -h <TREP Address/Hostname> -ct ssl -p <TREP SSL port> -l stdout -X -f item.txt -v -d 3 –Z –u <user>

example:

rmdstestclient -S IDN_RDF -h reuters-ems-trep1 -ct ssl -p 8101 -l stdout -X -f item.txt -v -d 3 –Z -u user1

benny.george

cusersuc180473documentsoutput.txt @Gurpreet:

we have tested with the tool it is working fine. but still the SIMCORP API is not working.

wasin.w

Hi @benny.george

The given output shows that the rmdstestclient can connect and consume data from reuters-ems-trep1 TREP via SSL port 8101 service hEDD successfully.

Could you please give us more detail about the SIMCORP API? Basically, the TREP infrastructure and Elektron support TREP and Elektron APIs (RFA, EMA, ETA, UPA, SFC, SSL API) only.

EXPLORE OUR SITES